Affinity
2.0
Additional Information Page 144
2 REM440
2.1 Quick Guide
1) Open Noah and double click on any client:
2) Select the Affinity
2
icon from the menu bar
3) To view an audiogram, you can select an older audiogram from a previous session or you can
manually enter an audiogram. You can configure your REM module to automatically use the most
recent Audiogram if desired.
NOTE: in order to have targets displayed, there needs to be an audiogram selected.
4) Enter the REM module using the REM tab in the upper right corner of the screen:
5) Select the desired test protocol in the protocol list. Both user-defined and
standard test protocols can be found in this dropdown list
6) Perform Tube Calibration
if this is not already done. It is recommended to perform the tube
calibration at least once a day. If using a regular probe tube, click “NO” when asked whether or
not the calibration should be performed with the SPL probe.
7) Perform otoscopy and insert the probe tube into the ear.
To Next Page
Loading...
Need help?
General
