Interacoustics affinity 2.0 - Exporting a Test Protocol

Affinity
2.0
Additional Information Page 113
1.8.6.2 Exporting a Test Protocol:
1) Go to the AC440 Setup (Menu | Setup | AC440 setup).
2) Click on Export.
3) Select if the file is to be saved as “read only”. In this case the protocol file is locked and the clinician
receiving it will not be able to make changes to it.
4) Browse for the location on the PC or USB where the test protocol is to be placed.
5) Click Save. Other AC440 users will then be able to upload the test protocol using the Import function.
2
3
5
4
5