Interacoustics affinity 2.0 Additional Information

Affinity
2.0
Additional Information Page 148
1. Open OtoAccess™
2. Select the client you want to work with.
3. If the client is not yet listed:
 press the New client button
 fill in at least the mandatory fields, marked with a red asterisk*.
 save the client details by pressing Save client information button.
4. Double click on Equinox
2.0
Suite or Affinity
2.0
Suite icon in the Select Instrument box
The selected suite will now open and automatically search for the hardware. If it does not detect the
hardware a dialog box pops up and asks if you want to run in simulation mode.
5. Click the REM tab in the upper right hand side of the screen to open the REM440 module.
For further instructions about working with the database, please see the operation manual for OtoAccess™.
2
3
4

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English