Interacoustics affinity 2.0 - Page 209

Affinity
2.0
Additional Information Page 199
Required Items:
• The Affinity
2.0
hardware
• Licensed Affinity
2.0
hardware with REM440 REM module
• Calibrated REM headset
• REM protocol
Procedure
1. Enter/Select an audiogram from Noah or from the AUD module. If no audiogram is entered or
selected, no targets will be displayed.
2. To enable Binaural REM measurements in the REM module you will need to Right click on the ear
selector icon. This will then show a binaural icon and a popup to alert the user when using this function.
