Affinity
2.0
Additional Information Page 205
16. Once you have fine-tuned your hearing devices so that the patient is happy and have counselled them
involving their opinions in the amplification of their hearing devices you can save and close the Suite and
finish the session. This is done by pressing the ‘Save and Exit’ button
Note: Binaural REM can also be used when fitting Open Fit type hearing aids. All this requires is for the
‘Open Fit Calibration’ to be run following the REUR measurement for the signal(s) you wish to use for the
following measurements.
To Next Page
Loading...
Need help?
General
