Affinity
2.0
Additional Information Page 223
Stimulus type: Select a stimulus using the dropdown list. Note that only Pure Tone, Warble
Tone, and Pink Noise are available for RECD.
Note: The input level for RECD is fixed at 70 dB. This cannot be changed by the user.
4) Recording Method:
Use RECD for both ears: Select if one RECD measurement is to be used for both ears.
Use pre-recorded coupler curve: Select this option to use a previously measured coupler curve.
This way you only need to perform the ear measure.
Note that this function can only be activated for a Pure Tone stimulus.
Use SPL probe: Select to use the SPL probe if your client does not have an ear mould, if the
mould is broken or has a bad fit, or if the client is uncooperative (see section for details on
RECD with own mould and SPL probe).
5) Colour:
Select a colour for the Right and Left curve (see section 2.6.2.1 regarding REUR/REUG for
details).
6) Predicted Curve:
Show predicted curve: Select to use a predicted curve as default using the tick box.
Note: Instructions cannot be selected in this screen as these will automatically appear when performing
each step of the RECD making sure that the measurement is performed correctly.
To Next Page
Loading...
