Interacoustics affinity 2.0 - Page 237

Affinity
2.0
Additional Information Page 227
 Preconditioning: This is relevant when using broadband signals such as ICRA (see section 0
for details). Select a time using the slider.
 Sweep delays: This is relevant if Continuous measurement is selected for Pure Tone or
Warble Tone. In this case sweep delays (in milliseconds) may be entered between the
individual sweeps (see section 0 for details).
 Smoothing Index: You have the option to smooth the measured curve using the slider (see
section 0 for details). The higher index number selected the more smoothing is applied.
3) Color:
 Select a colour for the Right and Left curve (see section 2.6.2.1 regarding REUR/REUG for
details).