Affinity
2.0
Additional Information Page 41
Start simulating by clicking the Right and/or Left buttons corresponding to the ear to be simulated.
The text above each button will then change from Normal to ON.
During the simulation it is possible to adjust the volume of the signal using the dB HL
Decrease/Increase channel 1/channel 2 buttons.
Patient Monitor Text with HLS
Now clinicians can input text in the patient monitor, which can then be read by out loud while simulating the
hearing loss. This is to help with counselling and adding text which can be read out loud can make it easier
than asking someone to spontaneously say something. Please see section 1.7.2.7 for more information on
how to setup the Patient Monitor.
To Next Page
Loading...
