22
▋Travel▋adjust【TRAVEL▋ADJUST】
▋▋Function▋Explanation
This function allows independent adjustment of the servo left/right (or up/down) movement, for
each channel. The adjustment is carried out with reference to the neutral position. Adjustment
is possible over an adjusting range between 0 and 150% in each direction. The default value is
100%, and this gives standard servo movement.
▋▋Setting▋Method
Rotate the dial to move to, and select, the channel that you wish to set (inverse display). Then
press the dial to display the setting box, and now change the numeric values by rotating the
dial.
※ The channel names on the screen will dier according to the model type.
▋▋Caution▋Note
Operate the servos carefully to conrm the control surfaces move as expected before ying.