JR XG 14 User Manual

75
▋Warning【WARNING】
▋▋Function▋Explanation
If the Throttle Stick or Flight Mode switches are set to potentially dangerous positions when
the transmitter is switched on, an alert is triggered. A warning will be displayed on the LCD
screen, and radio waves will not be emitted until the throttle stick and ight mode switches
have been returned to safe positions.
▋▋Setting▋Method
First change “INH” to “ACT”, to activate this function. Then set the position where the warning
will be given using the Throttle Stick, and choose the switches and positions where the
warning is to be set. Particularly for electrically powered gliders, do not forget to set the switch
that operates the motor.
▋▋For▋Helicopter
Initially, the Warning alert will not shut off unless the following
conditions are met:
⿟ Throttle stick set to the slowest position.
⿟ Flight Mode Switch set to Normal Mode “NORM”.
▋▋For▋Airplane
Initially, the Warning alert will not shut off unless the following
conditions are met:
⿟ Throttle stick set to the slowest position.
▋▋For▋Glider
There is no Warning alert default for Glider Mode. If necessary, set a
“Warning” which suits your application. For example, with an electric
powered glider, you may set a warning to ensure the motor switch is
in the O󱐯 position when the transmitter is turned on.
▋▋Caution▋Note
⿟ For safety reasons, be certain to activate this function and check the warning works as expected.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
System▋List
Warning Area Setting
Warning Range Direction
Warning Condition
Stick Monitor Screen
In the case of the Glider type, this will
become the Spoiler Stick position.
To the Switch that is to have the Warning applied.
The Name displays on the switch selection screen will differ slightly
depending on the model type.
Warning Area Setting
Warning Range Direction
Warning Condition
Stick Monitor Screen
In the case of the Glider type, this will
become the Spoiler Stick position.
To the Switch that is to have the Warning applied.
The Name displays on the switch selection screen will differ slightly
depending on the model type.
Warning Area Setting
Warning Range Direction
Warning Condition
Stick Monitor Screen
In the case of the Glider type, this will
become the Spoiler Stick position.
To the Switch that is to have the Warning applied.
The Name displays on the switch selection screen will differ slightly
depending on the model type.
Warning Area Setting
Warning Range Direction
Warning Condition
Stick Monitor Screen
In the case of the Glider type, this will
become the Spoiler Stick position.
To the Switch that is to have the Warning applied.
The Name displays on the switch selection screen will differ slightly
depending on the model type.

JR XG 14 Specifications

General

Brand	JR
Model	XG 14
Category	Remote Control
Language	English