JR XG 14 User Manual

25
▋Reverse▋Switch【REVERSE▋SW】
▋▋Function▋Explanation
This function reverses the servo operating direction (pulse change direction) of each channel.
▋▋Setting▋Method
Rotate the dial to move to and select the channel that you wish to change (inverse display).
Then press the dial to select the rotation direction. “NORM” is the normal direction and “REV”
is the reverse direction. Actually operate the servos and carefully conrm the settings before
ying.
※ The channel names on the screen will di󱐯er according to the model type.
Function▋List
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
This screen is for Helicopter type. Direction of Selected Channel
Select the channel.
IMPORTANT NOTICE
In the situation where the reverse switch setting
has been changed the Fail Safe has been set, and
this will after a󱐯ect the Fail Safe operation, it will
operate in the opposite direction to the condition
that was set.
Accordingly,inthesituationwheretheFailSafe
hasoperatedafterthethrottlechannelhasbeen
settoreversebysettingthereverseswitchinthe
transmitter,theservowillbesettotheFullHigh
side,whichwillbeextremelydangerous.
After nishing the transmitter settings, be sure to
implement the Fail Safe settings (Match the stick
to the position that you wish to set and press the
Memory key), and becertaintocarryoutoperation
conrmation. (Switch o󱐯 the transmitter once, and
check whether the servo movement reaches the
correct position.)

JR XG 14 Specifications

General

Brand	JR
Model	XG 14
Category	Remote Control
Language	English