JR XG 14 User Manual

70
▋Trim▋System【TRIM▋SYSTEM】
▋▋Function▋Explanation
In this screen, the various settings relating to the Trims can be changed.
The resolution of each Trim, the Trim type, whether separate or common trims should be used
for each flight mode can be set. Using this function, customers can easily change the trim
settings.
▋▋Setting▋Method
⿟ Trim Step
It is possible to set the trim travel amount per one (1) click. The default is Four (4) steps per
click. It is possible to set the step to be between one (1) step and ten (10) steps.
⿟ Trim Rate
If the throttle trim is Analog, a throttle trim rate is provided. This Trim Rate shall limit the
travel amount as a percentage of normal trim travel.
⿟ Trim Type
NormalTrim(NORM) is the default trim type. The entire servo operation range will be changed when the trim
is moved.
LimitStrokeTrim(L.S.T.): the trim amount set at each stick center (neutral) position will be the maximum, while
the e󱐯ect of the trim will disappear at the stick end positions. End point travel adjustment will not be changed
by the trim settings. It is possible to avoid damage to servos, linkages and control surfaces by using L.S.T.
IdleTrim(IDLE) is a Helicopter function only: This trim only functions at the low position of the throttle stick.
▋▋For▋Helicopter
⿟ Stunt Trim (STUNT TRIM)
It is possible to select the Trim adjustment to cover all ight modes (eg Normal, ST-1, ST-2, ST-3, ST-4, Hold), or
to set each ight mode to require separate trim adjustment.
COM : Common.
FMOD : Individual trims for each ight Mode.
▋▋For▋Airplane
⿟ Flight mode Trim adjustment (FMOD TRIM)
It is possible to select the Trim adjustment to cover all ight modes (eg ST-1, ST-2, ST-3, ST-4), or to set each
ight mode to require separate trim adjustment.
COM : Common.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
System▋List
Cross trim setting
Trim step
Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode
Type of Trims
NORM : Standard Trim
IDLE : Low Position of the Throttle stick for Helicopter Function
L.S.T. : Limit Stroke Trim
Cross trim setting Activation of the Flap Trim (ON/OFF)
Trim step
Direction of the Flaperon Trim settingDirection of the Flap Trim
Trim step
Type of Trims
NORM : Standard Trim
L.S.T. : Limit Stroke Trim
Type of Trims
NORM : Standard Trim
L.S.T. : Limit Stroke Trim
Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode
Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode
System▋List
Cross trim setting
Trim step Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode
Type of Trims
NORM : Standard Trim
IDLE : Low Position of the Throttle stick for Helicopter Function
L.S.T. : Limit Stroke Trim
Cross trim setting Activation of the Flap Trim (ON/OFF)
Trim step
Direction of the Flaperon Trim settingDirection of the Flap Trim
Trim step
Type of Trims
NORM : Standard Trim
L.S.T. : Limit Stroke Trim
Type of Trims
NORM : Standard Trim
L.S.T. : Limit Stroke Trim
Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode
Flight Mode Trim Setting
COM : Common
FMOD : Individual trims for
each Flight Mode

JR XG 14 Specifications

General

Brand	JR
Model	XG 14
Category	Remote Control
Language	English