38
▋Flight▋Mode▋Delay【FLIGHT▋MODE▋DELAY】
▋▋Function▋Explanation
When the Flight Mode is changed, the servos may move suddenly, causing a jerky reaction in
ight. To prevent this, it is possible to set a time to each channel separately, during which the servo will move
slowly to the new position when switching Flight Modes. This can be set separately in each Flight Mode.
▋▋Setting▋Method
Rotate the dial to select the desired channel in the setting screen, then press the dial to display the time
setting box. The time displayed here will be the time for moving to the servo position of the Flight Mode that is
currently being displayed.
If a delay is added to a channel being used for Governor or Gyro, or some function related to another delay
function which has been set, the combination might not work together, depending on the exact settings.
▋▋Caution▋Note
Actually operate the servos and carefully conrm the settings before ying.
Helicopter
To Next Page
Loading...
Need help?
General
