JR XG 14 User Manual

19
▋FLIGHT▋MODE
▋▋Function▋Explanation
⿟ The Flight Mode function allows switching between various aircraft settings using a switch.
This means it is possible to select aircraft ight characteristics using a ‘one-touch’ operation.
⿟ The maximum number of flight modes which can be selected varies with model type. It is
possible to select up to six ight modes for helicopters, up to ve ight modes for airplanes,
and a maximum of eight ight modes for gliders.
⿟ The current Flight Mode is displayed on the Initial INFO screen, where it can be conrmed. In
addition, it is possible to change the displayed ight mode name using the Flight Mode Name
screen in the System List.
※ Important note: By default, the Flight Mode switches in airplane and glider models are not set. Activate Flight
Modes using the Device Select screen.
▋▋Helicopter▋ight▋mode
⿟ NORMAL
⿟ STUNT-1
⿟ STUNT-2
▲ STUNT-3
▲ STUNT-4
▲ HOLD
※ ▲ Cannot be used during the initial set up.
ExtensionofFlightMode
※ STUNT-3 and STUNT-4 are not active by default.
It is possible to activate STUNT-3 and STUNT-4
from the "DEVICE SELECT" menu in the System
List.
※ Also note that "HOLD" is not active by default – it can be activated in the Function List (see "Throttle hold").
※ The following sequence gives the ight mode priority when the various switches are activated.
「HOLD>NORMAL>STUNT-3/STUNT-4>STUNT-1/STUNT-2」
▋▋Airplane▋ight▋mode
▲ FMOD-0
▲ FMOD-1
▲ FMOD-2
▽ FMOD-3
▽ FMOD-4
ToutilizeFlightmode
※ Airplane ight modes are not activated by default.
It is possible to activate these ight modes in the
system list, "DEVICE SELECT".
▽ This mark is only selectable when the Flight mode
has been (CUSTOM) customized.
Functions▋Common▋to▋All▋Models
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Current Flight Mode
Current Flight Mode
TIPS
Current Flight Mode

JR XG 14 Specifications

General

Brand	JR
Model	XG 14
Category	Remote Control
Language	English