28
▋▋For▋Airplane
There is one kind of throttle curve available and it is possible to change the curve at any time with a toggle
switch , ight mode switch or the throttle stick.
The numerical value “IN” shows the position of the throttle stick and the numerical value “OUT” shows the
output value to the servo.
Adjustment is possible over an adjusting range between 0 and 100% for each of the Slow or High (up or down)
directions. The graph may be further changed using the Hover Throttle and the Throttle Trim funcions.
▋▋Caution▋Note
Actually operate the servos and carefully conrm the settings before ying.
Normal mode
Stunt mode
Adjusting point Display
Current Flight Mode position
Point addition and deletion This changes the point connections to a Curve.
Numerical Display of the
Stick input Position and
output position
Each Adjusting point input
Position and output position
Copy function
To Next Page
Loading...
Need help?
General
