By using the Information screen, it is possible to display your desired Telemetry information on the rst page,
together with the Timer and Flight Mode selection on a screen that customers can customize so that it is easy
to check.
Initially it is set as Inhibited. Select the telemetry information to be displayed, and allocate it to a position on
the screen.
▋▋Caution▋Note
Rotate the dial to the right to access the rst page. Press the dial to choose which information to display.
The Telemetry sensor data is meant as an indication only, and therefore we cannot guarantee the accuracy of
any recordings obtained.
To Next Page
Loading...
