- xiv -
3.3 PREPARATION .......................................................................................3-8
3.3.1 ADJUST DISPLAY BRILLIANCE.......................................................3-8
3.3.2 ADJUST CONTRAST .......................................................................3-8
3.3.3 ADJUST OPERATION PANEL BRILLIANCE [PANEL]......................3-9
3.3.4 SWITCH DAY/NIGHT MODE [DAY/NIGHT]......................................3-9
3.3.5 ADJUST BRILLIANCE OF INFORMATION ON RADAR DISPLAY
(BRILLIANCE SETTING) ................................................................3-10
3.3.6 ADJUST SOUND VOLUME (BUZZER VOLUME) .......................... 3-11
3.3.7 RESET ALARM BUZZER [ALARM ACK] ........................................ 3-11
3.3.8 SET DISPLAY COLOR....................................................................3-12
3.4 BASIC OPERATIONS ...........................................................................3-14
3.4.1 START TRANSMISSION [TX/PRF].................................................3-14
3.4.2 STOP TRANSMISSION [STBY] ......................................................3-14
3.4.3 CHANGE RANGE (OBSERVATION RANGE SCALE)
[RANGE+/-] .....................................................................................3-14
3.4.4 TUNE ..............................................................................................3-15
3.4.5 CONTROL SENSITIVITY [GAIN/PL]...............................................3-15
3.4.6 SUPPRESS SEA CLUTTER [AUTO-SEA]......................................3-16
3.4.7 SUPPRESS RAIN/SNOW CLUTTER [AUTO-RAIN].......................3-18
3.4.8 REJECT RADAR INTERFERENCE [IR] .........................................3-20
3.4.9 HIDE/DISPLAY RANGE RINGS (RINGS) .......................................3-21
3.4.10 HIDE SHIP’S HEADING LINE (HL OFF).........................................3-21
3.4.11 HIDE GRAPHICS INFORMATION ON RADAR DISPLAY
(GRAPHIC DISPLAY) .....................................................................3-22
3.5 GENERAL OPERATIONS .....................................................................3-23
3.5.1 MOVE CROSS CURSOR MARK BY TRACKBALL.........................3-23
3.5.2 USE EBLS (ELECTRONIC BEARING LINES) [EBL1/2] .................3-24
3.5.3 SET EBL OPERATION (EBL1 /2 SETTING) ...................................3-26
3.5.4 DISPLAY VARIABLE RANGE MARKERS [VRM1/VRM2]...............3-29
3.5.5 DISPLAY PARALLEL INDEX LINES (PARALLEL INDEX LINE) .....3-32
3.5.6 SWITCH BEARING DISPLAY MODE [AZI MODE] .........................3-40
3.5.7 SWITCH TRUE/RELATIVE MOTION DISPLAY MODE [TM/RM]....3-41
3.5.8 MOVE OWN SHIP’S DISPLAY POSITION [OFF CENT].................3-42
3.5.9 DISPLAY OTHER SHIPS’ TRAILS [TRAILS] ..................................3-43
3.5.10 SWITCH PULSE LENGTH (GAIN/PL) ............................................3-46
3.5.11 EXPAND TARGETS (TARGET ENHANCE) ....................................3-47
3.5.12 USE VIDEO PROCESS (PROCESS) .............................................3-48
3.5.13 ZOOM .............................................................................................3-49
3.5.14 USE MARKER [MOB] .....................................................................3-50
3.5.15 MARKING [MARK] ..........................................................................3-51
To Next Page
Loading...
Need help?
General
