3─136
3
3.12 USING CARD
y
y y
MEM CAPA/Copy
1. Copy Internal -> Card 2
2. Copy Card 2 -> Internal
3. Copy Card 1 -> Card 2
4. Clear File
0. EXIT
7. Show Card 1
8. Show Card 2
RACK
OVER WRITE
0000
0000
0000
0000
->
4 5 6
1 2 3
7 8 9
- 0 +
CLR ENT
Memory Content
OTAL
TRACK
Remain
MARK/LINE
Remain
WPT
Remain
ROUTE
Remain
CARD Remain
Card 2
0000
1. ALL
2.
RACK
3.
MARK/LINE
4.
WPT/ROUTE
5. ATA TRACK
[I] Copy Internal Information to Card 2 (Copy Internal → Card 2)
Procedures 1 Press [1] key while the CAPA/Copy Menu is open.
The items to be saved are displayed.
2 Using the numeric key, select a item to be saved.
A file name to copy Internal information to Card 2 can be entered.
3 Using the numeric key, enter a file name.
After enter a file name, select ENT.CLR will be cancelled.
The system writes internal information into Card 2 with an entered number used as a file
name.
The capacity of information that can be saved in the internal portion is limited to the
maximum number of points in items described on the previous page. For the capacity of
information that can be saved in a card, the system can save information in a card until the
card capacity is filled with a file, counting the information saved in the internal portion as
a file.
To Next Page
Loading...
Need help?
General
