8─15
Table 8-3 List of System Error Message (2)
DLOG 2-axis log: No communication
DLOG(DATA) 2-axis log: Data error
GPS GPS: No communication
GPS(DATA) GPS: Data error
GPS(STATUS) GPS: Status error
PROC(BOOT) Signal processing unit: Boot error
PROC(INT) Signal processing unit: Interrupt error
PROC(AZI) Signal processing unit: BP error
PROC(HL) Signal processing unit: HL error
ATA(BOOT) ATA: Boot error
ASIC(INT) Error during interrupt to ASIC1
ASIC1 to RADAR Error during interrupt from ASIC1 to RADAR DSP
RADAR to ASIC2 Error during interrupt from RADAR DSP to ASIC2
ASIC1 to ATA Error during interrupt from ASIC1 to ATA DSP
ATA to ASIC2 Error during interrupt from ATA DSP to ASIC2
ASIC to LOCAL CPU Error during interrupt from ASIC1 to LOCAL CPU
PROC(VIDEO) VIDEO error
PROC(TRIGGER) Trigger error
AIS AIS: No communication
AIS(DATA) AIS: Communication error
AIS I/F AIS I/F: No communication
AIS I/F(DATA) AIS I/F: Communication error
AIS ALARM *** AIS alarm (Up to 10 alarm messages can be displayed.)
COM1 COM1 port alarm
COM2 COM2 port alarm
COM3 COM3 port alarm
To Next Page
Loading...
Need help?
General
