JRC JMA-5206 - Page 441

RADAR Menu
－
1 Process Setting － 1 Video Latitude
2 Video Noise Rejection 3 Auto DR Control 4 Process Switch 5 2nd Process Mode 6 Process Switch Rrange 7 Fast Target Detection 8 User Function Setting － 1 Function1 Setting
－
1 Mode 2IR 3 Process 4 Target Enhance 5 Auto STC/FTC 7 Save Present State 8 9 NEXT
↓
1 Pulse Width 0.75nm 2 Pulse Width 1.5nm 3 Pulse Width 3/4nm 4 Pulse Width 6/8nm 6 Pulse Width 12nm 7 Pulse Width 16nm 9 NEXT
↓
1 Video Latitude 2 Video Noise Rejection 3 Auto DR Control 4 Process Switch 5 2nd Process Mode 6 Process Switch Range 7 Fast Target Detection 9 NEXT
↓
1 Trails Interval 2 Trails Mode 3 Trails Ref Level 4 Trails Reduction 5 Time/CONT Combine 6 Trails Process 7 Max Interval 9 NEXT
↓
1 Gain Offset 2 XMIT Repetition FREQ 3 Small Buoy Detectiton 4 Fishnet Detection 5 Antenna Height 8 Set Mode Default 9 Initialize
2 Function2 Setting 3 Function3 Setting 4 Function4 Setting