JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.5 USE OWN SHIP'S TRACK
3ļ¼41
3
3.5.3 Save Own Ship's Track (Own Track Memory)
To save own ship's track, storage at a specified time interval and at a specified
range interval can be selected.
The track storage interval can be selected from 10 preset time intervals and 8
preset range intervals.
Procedures
1) Left-click the Own Track Interval unit button located at the lower
right of the display.
Every time the button is clicked, the units of measure for the storage are switched.
2) Left-click the Own Track Interval button located at the lower right
of the display.
Every time the button is clicked, storage intervals are switched.
When Off is selected, the storage function is turned off.
3.5.4 Cancel Saving of Own Ship's Track (Own Track Memory)
Storage of own ship's track can be turned off.
Cance l
1) Left-click the Own Track Interval button located at the lower right
of the display.
Every time the button is clicked, interval for track storage are switched.
When Off is selected, the storage function is turned off.
Storage intervals that can be selected
Time: 3 sec, 5 sec, 10 sec, 30 sec, 1 min, 3 min, 5 min, 10 min, 30 min, and 60 min
Range: 0.1 NM, 0.2 NM, 0.3 NM, 0.5 NM, 1 NM, 3 NM, 5 NM, and 10 NM
Own Track Interval
Map On/Off
Own Track Color
Own Track Interval Unit
To Next Page
Loading...
Need help?
General
