8ļ¼34
JMA-9100 Instruction Manual > 8.COUNTERMEASURE FOR TROUBLE ... > 8.4 REPLACEMENT OF MAJOR PARTS
8.4.4 Replacement of 23inch LCD CML-799
Do not touch the LCD screen directly with your fingers.
Do not touch the AR filter directly with your fingers.
Perform the replacement work on a soft cloth to avoid damage to the LCD screen and
other parts.
[Required tools]
ā¢
A Phillips screwdriver for 4 mm screws
ā¢
A Phillips screwdriver for 6 mm screws
[Disassembly]
1) Remove the tilt fixing handle (standalone type
only).
2) Tilt up the screen as much as you can
(standalone type only).
3) Remove the screws (M6) from the four
corners and displace the face cover.
Replacement of LCD monitor must be made by specialized
service personnel.
For details, refer to Service Manual.
Remove
To Next Page
Loading...
Need help?
General
