3ļ¼110
JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.8 APPLIED OPERATIONS
3.8.9 AUTO Backup
Data can be automatically backed up when the power supply is turned on.
Procedures
1) Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
2) Open the Plot Setting menu by performing the following menu
operation.
āć
3) Left-click the item button of Backup button.
The AUTO Backup menu will appear.
4) Select the number for the card slot to back up data.
Data that can be backed up includes own ship's track (Own Track), other ships' trails data
(Target Track), mark/line data (Mark/Line), destination data (WPT), and route data (Route).
The file name to be saved is either 9998 or 9999. Every time the power supply is turned on,
those numbers are alternately displayed.
: The automatic backup function is turned off.
: Data is automatically backed up on the compact flash
memory card inserted into slot 1.
: Data is automatically backed up on the compact flash
memory card inserted into slot 2.
Main
8. Plot Setting
5. AUTO Backup
Off
Slot1
Slot2
To Next Page
Loading...
Need help?
General
