JRC JMA-9110-6XA User Manual

6－12
JMA-9100 Instruction Manual > 6.TRUE AND FALSE ECHOES ON DISPLAY > 6.5 DISPLAY OF RADAR TRANSPONDER (SART)
6.5 DISPLAY OF RADAR
TRANSPONDER (SART)
The SART (Search and rescue Radar Transponder) is a survival device authorized
by the GMDSS (Global Maritime Distress and Safety System), which is used for
locating survivors in case that a distress accident occurs at sea. The SART is
designed to operate in the 9 GHz frequency band.
When receiving the 9 GHz radar signal (interrogating signal) transmitted from the
radar equipment on a rescue ship or search aircraft, the SART transmit a series of
response signals to inform the distress position to the rescue and search party.
Procedures
1) Press [RANGE +] or [RANGE -] key to set the radar range to 6 NM
or 12 NM.
2) Set the SART display mode according to the procedures below.
→
→
→
With the SART display mode set to ON, settings as shown below are made automatically.
This radar provides a shortcut item to make settings for SART
signal reception. Execution of this item automatically switches
to the setting for SART reception.It also functions for detect the
beacon or target enhancer.
：
SART ON
：
SART OFF
Sea clutter control :
Minimum (Most counterclockwise)
AUTO SEA function : OFF
Rain and Snow Clutter Control (RAIN) : Minimum
Auto Rain and Snow Clutter function
(AUTO RAIN)
:OFF
TUNE control : No tuning (to weaken clutter
echoes)
Interference rejection (IR) : OFF
PROCESS : OFF
i
Main
3. RADAR Menu
1. Process Setting
9. SART
On
Off

JRC JMA-9110-6XA Specifications

General

Brand	JRC
Model	JMA-9110-6XA
Category	Marine Radar
Language	English