JMA-9100 Instruction Manual > 5.OPERATION OF TARGET TRACKING AND AIS > 5.2 TARGET TRACKING OPERATION
5ļ¼19
5
5.2.3.3 Cancellation of Numeric Data Display (CNCL Data)
Procedures
1) Put the cursor on the tracked target with which numeric data is
displayed, and right-click.
The cursor mode list will appear.
2) Left-click button.
The numeric value will disappear.
5.2.4 Displaying Target ID No.(Target Number Display)
A target ID number is a value displayed beside the acquisition symbol when a
target is acquired.
A target ID number 1 to 100 is assigned to each target in acquisition order. Once a
target ID number is assigned, it identifies the target until the target is lost or the
target acquisition is canceled.
Procedures
1) Open the TT Menu by following menu operation.
2) Left-click the item button of
Target Number Display will appear.
3) Press the [numeric] key corresponding to the display method to
be set.
If there are many tracking targets and their symbol display is confusing, set Target Number
Display to off to view the radar display easily.
: Displays target ID numbers.
: Hides target ID numbers.
: Displays target ID number with target track.
An ID number is always displayed for only targets with which
numeric data is displayed.
6. CNCL Data
TT
4. Target Number Display
On
Off
Target Track
i
To Next Page
Loading...
Need help?
General
