JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.7 USE ROUTE FUNCTION
3ļ¼87
3
3.7.8 Operate Route Data File
Route data saved in the radar system can be saved onto a flash memory card, and
data can be loaded from a flash memory card into the radar system.
With regard to this item, only route data can be saved and loaded. To save or load
own ship's track, target track data, and mark/line data, see Section 3.11 "USING
CARD".
3.7.8.1 Selecting a card slot (Select Card Slot)
Specify the card slot to be used for accessing a route data file
Flash memory card (option) is necessary.
Procedures
1) Insert a flash memory card into the card slot.
2) Open the File Operations menu by performing the menu
operation below.
āć
3) Left-click the set value of the item, and
select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
3.7.8.2 Saving route data (Save)
Route data saved in the radar system is saved onto a flash memory card.
Flash memory card (option) is necessary.
Selecting a card slot
(Select Card Slot):
Specify the card slot to be used for operating a
route data file.
Saving route data (Save): Route data saved in the radar system is saved
onto a flash memory card.
Loading route data (Load): Route data saved on a flash memory card is
loaded into the radar system.
Erasing route data file
(Erase):
A route data file saved in a flash memory card
is erased.
Route
4. File Operation
1. Select Card Slot
To Next Page
Loading...
Need help?
General
