To Next Page

To Previous Page

JMA-9100 Instruction Manual > C.Menu Index > C.7 Route

C－11

C.7 Route

├ 1. Select Route - - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.1 on page 3-67

├ 2. WPT/Route Settig

│├1. Waypoint Alarm - - - - - - - - - - - - - - - - - - - - - - -

section 3.7.4.1 on page 3-79

│├2. Route Alarm - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.4.2 on page 3-80

│├3. Set Route Sequence- - - - - - - - - - - - - - - - - - - - - - section 3.7.2 on page 3-68

││├1. Planned Speed - - - - - - - - - - - - - - - - - - - section 3.7.3.5 on page 3-77

││├2. Add - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.2 on page 3-69

││├3. Correct Position - - - - - - - - - - - - - - - - - - - section 3.7.2.3 on page 3-70

││├4. Correct Planned Speed - - - - - - - - - - - - - - - section 3.7.2.4 on page 3-71

││├5. Delete - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.5 on page 3-72

││├6. Insert - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.2.6 on page 3-73

││└7. New Monitor Route - - - - - - - - - - - - - - - - - section 3.7.2.1 on page 3-68

│├6. Waypoint Input - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.3 on page 3-75

│├7. Save Temporary Route

│├8. Off-Track Limit Line - - - - - - - - - - - - - - - - - - - - -

section 3.7.6.1 on page 3-83

│├9. Next

│├1. SEL. NUM/Comment Size - - - - - - - - - - - - - - - - - -

section 3.7.6.2 on page 3-84

│├2. Waypoint Vector - - - - - - - - - - - - - - - - - - - - - - - section 3.7.6.3 on page 3-84

│├3. Status of Origin/DEST - - - - - - - - - - - - - - - - - - - - section 3.7.6.4 on page 3-85

│└4. WPT Number Display - - - - - - - - - - - - - - - - - - - - section 3.7.6.5 on page 3-85

├ 3. WPT/Route Operations - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.5 on page 3-81

│├1. Route Sequence- - - - - - - - - - - - - - - - - - - - - - - section 3.7.5.1 on page 3-81

│├2. Waypoint Switch Mode- - - - - - - - - - - - - - - - - - - - section 3.7.6.6 on page 3-86

│├3. Waypoint Skip - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.5.2 on page 3-82

│├4. Waypoint Back Skip - - - - - - - - - - - - - - - - - - - - - section 3.7.5.2 on page 3-82

│├5. Set/Cancel Waypoint

│└6. Clear WPT/Route Data

├ 4. File Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - -

section 3.7.8 on page 3-87

│├1. Select Card Slot - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.1 on page 3-87

│├2. Load - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.3 on page 3-88

│├3. Save - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.2 on page 3-87

│└4. Erase - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 3.7.8.4 on page 3-89

JRC JMA-9110-6XA User Manual

Other manuals for JRC JMA-9110-6XA