3ļ¼104
JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.8 APPLIED OPERATIONS
3.8.7.2 Using Option Keys (Directly displaying a specified )
Preset the that is to be displayed with the option key switch.
Procedures
1) Perform the general menu open procedure to open the menu that
is to be directly displayed with Option Key.
2) While the menu is open, hold down [OPTION 1] key or [OPTION 2]
key for 2 seconds.
The menu currently being displayed is saved for the pressed option key.
3.8.7.3 How to use the Optin key ( Display)
Preset whether to execute the display by operating the user key.
Procedures
1) Press either [OPTION 1] key or [OPTION 2] key for which
has been set.
The zoom mode is activated.
2) Put the cursor on a location that is to be zoomed, and left-click.
Zoom is set.
Cance l
1) Press either [OPTION 1] key or [OPTION 2] key for which
has been set.
The zoom mode is cancelled and a normal display will appear.
i
The menu set for the pressed option key will open.
Subsequently, general menu operation can be performed.
Menu
Menu
Zoom
Zoom
Zoom
Zoom
To Next Page
Loading...
Need help?
General
