JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.11 USING CARD
3ļ¼121
3
The File Manager window will appear.
ā¢ The file name and data saved in the selected device will be displayed.
ā¢ Pressing the arrows located at the upper right and lower right of the file name
list will scroll the list.
Information saved in the processor is displayed in the Memory Content.
Own Track : Number of data points for own ship's track (7000 points maximum)
Remain : Number of remaining data points of own ship's track that can be saved
Target Track : The number of other ships' trails (up to 20 targets)
Remain : The remaining number of other ships' trails to be saved
Mark/Line
: Number of mark and line points made with user map (up to 20000 items)
Remain : Number of remaining data points of marks and lines that can be saved
WPT : Number of data points of created waypoints (512 points maximum)
Remain : Remaining waypoints that can be saved
Route : Number of data points of created routes (1 route maximum)
Remain : Remaining routes that can be saved
Internal Total : Total number of data points
Exit
Device 2 file list
scroll
Device 2
selected
Device 2 format
Copy file from
device 1 to device 2
Copy file from
device 2 to device 1
Device 2 erase
selected file
Device 1
select and
cancel all files
Device 1 erase
selected file
Device 1 selected
Type of file
displayed
Device 2
select and
cancel all files
Device 1 file list
scroll
Device 2
device type
Device 1
device type
Device 1 format
Processor saved
information
Device 1 saved
information
Device 1 saved
information
Message
To Next Page
Loading...
Need help?
General
