JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.11 USING CARD
3ļ¼125
3
3.11.1.4 Erase File (Erase)
Procedures
1) While the File Manager window is open, left-click the device 1
selection button.
Selected items for Device1 will be displayed.
2) Left-click button corresponding to the device in which data to be
erased is saved.
The list of files saved in the selected device will be displayed.
3) Select data to be erased.
Left-click button one more time will cancel the selection.
4) Left-click button.
Confirmation Window will appear.
5) Left-click the button.
The selected file will be erased.
3.11.1.5 Initializing a card (Format)
Procedures
1) While the File Manager window is open, left-click the device 1
selection button or the device 2 selection button.
Selection items for Device1 or Device2 will appear.
2) Left-click the button which corresponds to the system (device)
where data to be displayed is saved.
The File Manager window will appear.
3) Put the cursor on for the device to be initialized, and
Left-click button.
Confirmation Window will appear.
4) Left-click the button.
Initialization will be executed.
Erase
1. Yes
Format
1. Yes
To Next Page
Loading...
Need help?
General
