–
88
–
[ In case of manual inputting ]
8) Press STEP DETERMINATION button
7
to determine the inputted data.
9) Press ten keys
8
to input length
between steps
B
.
10) Press ENTER button
9
.
[ In case of teaching inputting ]
8) Set the materials and perform sewing.
9) The sewing machine stops at the changeover
position of the step.
10) Press the knee switch.
11) Repeat procedures 7) through 10).
B
7
6
9
8
5) Change pitch and basic size.
Refer to
"7-6 (2) Changing the pitch"
.
Refer to
"8-1 (9) Changing the size"
.
6) Select left/right alternate sewing.
Refer to
"7-5 (4) Selecting the left/right
alternate sewing"
.
7) Press SHIRRING AMOUNT button
6
to input the shirring
amount.
To Next Page
Loading...
