The shipper has the option to ship either the front panel separately or to ship the front panel along with
the chassis. If the front panel arrives with the chassis, set aside the front panel box until you are ready to
verify the contents of the order.
To unpack the chassis (see Figure 44 on page 129):
Figure 44: Shipping Crate and Accessory Box
1. Move the shipping box to a staging area as close to the installation site as possible. While the chassis
is bolted to the pallet, you can use a forklift or pallet jack to move it. Make sure there is enough space
to remove components from the shipping box.
2. Position the shipping box with the arrows pointing up.
129
To Next Page
Loading...
Need help?
General
