Juniper MX104 - MX104 Routing Engine USB Port Specifications; Table 59: Console Port Pinouts

Table 59: Console Port Pinouts
DescriptionSignalPin
Request to SendRTS1
Data Terminal ReadyDTR2
Transmit DataTXD3
Signal GroundGround4
Signal GroundGround5
Receive DataRXD6
Data Set ReadyDSR/DCD7
Clear to SendCTS8
Related
Documentation
MX104 Routing Engine Overview on page 21•
• Maintaining the MX104 Routing Engines on page 192
MX104 Routing Engine USB Port Specifications
The following Juniper Networks USB Flash drives have been tested and are officially
supported for the USB port on all MX Series routers:
•
RE-USB-1G-S
•
RE-USB-2G-S
•
RE-USB-4G-S
CAUTION: Any USB memory product not listed as supported for MX Series
routers has not been tested by Juniper Networks. The use of any unsupported
USB memory product could expose your MX Series router to unpredictable
behavior. Juniper Networks Technical Assistance Center (JTAC) can provide
only limited support for issues related to unsupported hardware. We strongly
recommend that you use only supported USB Flash drives.
All USB Flash drives used on MX Series routers must have the following features:
•
USB 2.0 or later.
•
Formatted with a FAT or MS-DOS file system.
Copyright © 2017, Juniper Networks, Inc.86
MX104 3D Universal Edge Router Hardware Guide