CHAPTER 35
Electrical Safety Guidelines and Warnings
•
In Case of an Electrical Accident on page 241
•
General Electrical Safety Warnings for Juniper Networks Devices on page 241
•
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks
Devices on page 245
•
MX104 AC Power Electrical Safety Guidelines and Warnings on page 246
•
MX104 DC Power Electrical Safety Guidelines on page 247
•
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 248
•
Site Electrical Wiring Guidelines for MX104 Routers on page 251
In Case of an Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the router.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
General Safety Guidelines for Juniper Networks Devices on page 217•
• General Safety Warnings for Juniper Networks Devices on page 218
General Electrical Safety Warnings for Juniper Networks Devices
•
Grounded Equipment Warning on page 242
•
Grounding Requirements and Warning on page 242
•
Midplane Energy Hazard Warning on page 243
•
Multiple Power Supplies Disconnection Warning on page 243
•
Power Disconnection Warning on page 244
241Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
