Juniper MX104 - Compliance Statements for NEBS for MX104 Routers

•
Immunity:
•
EN 55024 Information Technology Equipment Immunity Characteristics
•
EN-61000-3-2 Power Line Harmonics
•
EN-61000-3-3 Power Line Voltage Fluctuations
•
EN-61000-4-2 Electrostatic Discharge
•
EN-61000-4-3 Radiated Immunity
•
EN-61000-4-4 Electrical Fast Transients
•
EN-61000-4-5 Surge
•
EN-61000-4-6 Immunity to Conducted Disturbances
•
EN-61000-4-11 Voltage Dips and Sags
•
ETSI:
•
ETSI EN-300 019: Environmental Conditions & Environmental Tests for
Telecommunications Equipment
•
ETSI EN 300 019-2-1 (2000) – Storage
•
ETSI EN 300 019-2-2 (1999)—Transportation
•
ETSI EN 300 019-2-4 (2003)—Stationary Use at Non-Weather-protected Locations
•
ETS 300753 (1997)—Acoustic noise emitted by telecommunications equipment
•
GR-3108-CORE Issue 2, December 2008—Generic Requirements for Network
Equipment in the Outside Plant (OSP)
NEBS Level 3 Compliant:
•
GR-63-Core: NEBS, Physical Protection
•
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
•
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
Related
Documentation
Compliance Statements for EMC Requirements for MX104 Routers on page 255•
• Compliance Statements for NEBS for MX104 Routers on page 254
• Compliance Statements for Acoustic Noise for MX104 Routers on page 256
• Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 256
Compliance Statements for NEBS for MX104 Routers
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
Copyright © 2017, Juniper Networks, Inc.254
MX104 3D Universal Edge Router Hardware Guide