Juniper MX104 - Figure 56: Installing a DC Power Supply; Figure 57: Connecting the DC Power Cables

If the status LED indicates that the power supply is not functioning normally, repeat
the installation and cabling procedures.
Figure 56: Installing a DC Power Supply
Figure 57: Connecting the DC Power Cables
Related
Documentation
Connecting the MX104 Router to Earth Ground on page 113•
• MX104 Router Grounding Specifications on page 76
• Removing an MX104 DC Power Supply on page 177
• MX104 DC Power Electrical Safety Guidelines on page 247
• DC Power Electrical Safety Warnings for Juniper Networks Devices on page 248
• MX104 DC Power Specifications on page 99
• MX104 DC Power Cable and Lug Specifications on page 100
Copyright © 2017, Juniper Networks, Inc.176
MX104 3D Universal Edge Router Hardware Guide