Juniper MX104 - Replacing an MX104 Routing Engine; Effect of Taking the MX104 Routing Engine Offline; Figure 44: Installing a Routing Engine

user@ host > show chassis environment routing-engine
Routing Engine 0 status:
State Online Master
Temperature 34 degrees C / 93 degrees F
CPU Temperature 43 degrees C / 109 degrees F
Routing Engine 1 status:
State Online Standby
Temperature 33 degrees C / 91 degrees F
CPU Temperature 39 degrees C / 102 degrees F
If the router is operational and the Routing Engine is functioning properly, the state
shows Online Master or Online Standby. For more information about using the show
chassis routing-engine CLI command, see show chassis environment routing-engine.
Figure 44: Installing a Routing Engine
g0 0 76 31
Related
Documentation
MX104 Routing Engine Overview on page 21•
• Maintaining the MX104 Routing Engines on page 192
• Removing an MX104 Routing Engine on page 155
• Effect of Taking the MX104 Routing Engine Offline on page 152
• MX104 Routing Engine Serial Number Label on page 208
Replacing an MX104 Routing Engine
1.
Effect of Taking the MX104 Routing Engine Offline on page 152
2.
Taking an MX104 Routing Engine Offline on page 154
3.
Removing an MX104 Routing Engine on page 155
4.
Installing an MX104 Routing Engine on page 156
Effect of Taking the MX104 Routing Engine Offline
Before you replace a Routing Engine, you must take the Routing Engine offline. The
Routing Engine is hot-pluggable.
Copyright © 2017, Juniper Networks, Inc.152
MX104 3D Universal Edge Router Hardware Guide