Juniper MX104 - Figure 1: Front Panel of the MX104 Router; Figure 2: Rear View of the MX104 Router; MX104 Chassis Overview

Figure 1: Front Panel of the MX104 Router
g007600
Figure 2: Rear View of the MX104 Router
Related
Documentation
MX104 Hardware and CLI Terminology Mapping on page 6•
• MX104 Port and Interface Numbering on page 53
• MX104 Chassis Overview on page 4
MX104 Chassis Overview
The MX104 router contains a front panel with slots in which you can install
field-replaceable units (FRUs). From the front of the chassis, you can see the following
components (see Figure 3 on page 5):
•
Alarm console port labeled ALARM, which accepts a DE-15 alarm cable.
•
Alarm LEDs that indicate major or minor alarms.
•
Built-in 10-Gigabit Ethernet MIC with four ports that accept 10-Gigabit Ethernet SFP+
transceivers.
•
ONLINE/OFFLINE button.
•
Chassis status LED labeled SYS OK
•
External building integrated timing system (BITS) port labeled EXT REF CLOCK
Copyright © 2017, Juniper Networks, Inc.4
MX104 3D Universal Edge Router Hardware Guide