NOTE: The MX104 complies with GR3108 as Class-2 equipment.
Related
Documentation
MX104 Router Physical Specifications on page 69•
Preparing the Site for the MX104 Router Overview
To prepare a site for router installation:
1. Verify that environmental factors such as temperature and humidity do not exceed
router tolerances. See “MX104 Router Environmental Specifications” on page 70.
2. Verify that the site and installation plan meets all safety guidelines and requirements.
See “General Safety Guidelines for Juniper Networks Devices” on page 217.
3. Measure distance between external power sources and the router installation site.
See:
•
MX104 AC Power Cord Specifications on page 96
•
MX104 DC Power Cable and Lug Specifications on page 100
4. Locate sites for connection of system grounding. See “MX104 Router Grounding
Specifications” on page 76.
5. Calculate the power consumption and requirements. See:
•
MX104 Power Consumption on page 93
•
MX104 AC Power Specifications on page 95
•
MX104 DC Power Specifications on page 99
6. Verify that the plan for power installation meets all electrical safety guidelines. See:
•
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks
Devices on page 245
•
MX104 AC Power Electrical Safety Guidelines and Warnings on page 246
•
MX104 DC Power Electrical Safety Guidelines on page 247
7. Verify that your rack or cabinet meets the minimum requirements for the installation
of the router. See:
•
Rack Requirements for MX104 Routers on page 72
•
Cabinet Requirements for MX104 Routers on page 73
8. Plan the location of the rack, including required space for airflow and maintenance.
See “Clearance Requirements for Airflow and Hardware Maintenance on MX104
Routers” on page 75.
71Copyright © 2017, Juniper Networks, Inc.
Chapter 7: Preparation Overview
To Next Page
Loading...
