Table 69: AC Power Cord Specifications (continued)
Design StandardPlug TypeElectrical SpecificationModel NumberCountry
NEMA 5-15498G125 VAC, 13 A, 60 HzCBL-PWR-C15M-HITEMP-USNorth America
BS 1363/ABS89/13250 VAC, 10 A, 50 HzCBL-PWR-C15M-HITEMP-UKUnited Kingdom
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
NOTE: In North America, AC power cords must not exceed approximately
14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code
(CEC) Section 4-010(3). You can order ACpowercordsthat are in compliance.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
NOTE: Use power cords rated up to 149° F (65° C) for ambient temperatures
up to 140° F (60° C).
Related
Documentation
• Connecting AC Power Cords to the MX104 Router on page 115
• Replacing an MX104 AC Power Supply on page 170
• MX104 AC Power Electrical Safety Guidelines and Warnings on page 246
• MX104 AC Power Specifications on page 95
97Copyright © 2017, Juniper Networks, Inc.
Chapter 11: AC Power Specifications
To Next Page
Loading...
