Juniper MX104 - Page 156

}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
16. Commit the configuration to activate it on the router.
[edit]
root@# commit
17. (Optional) Configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
18. When you have finished configuring the router, exit configuration mode.
[edit]
root@host# exit
root@host>
Related
Documentation
• MX104 Hardware and CLI Terminology Mapping on page 6
Copyright © 2017, Juniper Networks, Inc.132
MX104 3D Universal Edge Router Hardware Guide