Juniper MX104 - Page 81

ge-1/0/2.0 up up inet 10.0.2.10/24
multiservice
ge-1/0/3 up up
ge-1/0/3.0 up up inet 10.0.3.10/24
multiservice
ge-1/0/4 up up
ge-1/0/4.0 up up inet 10.0.4.10/24
multiservice
ge-1/0/5 up up
ge-1/0/5.0 up up inet 10.0.5.10/24
multiservice
ge-1/0/6 up up
ge-1/0/6.0 up up inet 10.0.6.10/24
multiservice
ge-1/0/7 up up
ge-1/0/7.0 up up inet 10.0.7.10/24
multiservice
ge-1/0/8 up up
ge-1/0/8.0 up up inet 10.0.8.10/24
multiservice
ge-1/0/9 up up
ge-1/0/9.0 up up inet 10.0.9.10/24
multiservice
ge-1/1/0 up up
ge-1/1/0.0 up up inet 10.1.0.11/24
multiservice
ge-1/1/1 up up
ge-1/1/1.0 up up inet 10.1.1.11/24
multiservice
ge-1/1/2 up up
ge-1/1/2.0 up up inet 10.1.2.11/24
multiservice
ge-1/1/3 up up
ge-1/1/3.0 up up inet 10.1.3.11/24
multiservice
ge-1/1/4 up up
ge-1/1/4.0 up up inet 10.1.4.11/24
multiservice
ge-1/1/5 up up
ge-1/1/5.0 up up inet 10.1.5.11/24
multiservice
ge-1/1/6 up up
ge-1/1/6.0 up up inet 10.1.6.11/24
multiservice
ge-1/1/7 up up
ge-1/1/7.0 up up inet 10.1.7.11/24
multiservice
ge-1/1/8 up up
ge-1/1/8.0 up up inet 10.1.8.11/24
multiservice
ge-1/1/9 up up
ge-1/1/9.0 up up inet 10.1.9.11/24
multiservice
...
The show interfaces terse command displays the four SONET/SDH interfaces for the
MIC installed in MIC slot 0/1 as coc3-0/2/0 through co3-2/0/3.
user@host> show interfaces terse
57Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Card Components and Descriptions