Juniper SRX1500 User Manual

• Troubleshooting Resources for the SRX1500 Services Gateway Overview on page 89
Maintaining the SRX1500 Services Gateway Power Supply
To maintain the power supplies of the services gateway:
•
Make sure that all power and grounding cablesare arranged so that they do not obstruct
access to other services gateway components.
•
Routinely check the PWR LED on the front panel. If this LED is solid green, the power
supplies are functioning normally.
•
Periodically inspect the site to ensure that the grounding and power cables connected
to the services gateway are securely in place and that there is no moisture accumulating
near the services gateway.
Related
Documentation
• Required Tools and Parts for Maintaining the SRX1500 Services Gateway on page 87
• Routine Maintenance Procedures for the SRX1500 Services Gateway on page 87
• Troubleshooting Resources for the SRX1500 Services Gateway Overview on page 89
Copyright © 2017, Juniper Networks, Inc.88
SRX1500 Services Gateway Hardware Guide

Juniper SRX1500 Specifications

General

IPSec VPN Throughput	3 Gbps
Maximum Concurrent Sessions	2 million
Maximum Firewall Policies	20, 000
Operating Temperature	32° to 104° F (0° to 40° C)
Form Factor	1U
Throughput	20 Gbps
Interfaces	16x 1GbE
Power Supply	Dual AC power supplies
Storage Temperature	-40° to 158° F (-40° to 70° C)
Humidity	90% non-condensing