Juniper SRX1500 - Connecting the SRX1500 Services Gateway to a Management Console

Required Tools and Parts for Installing the SRX1500 Services Gateway
To install the services gateway, you need the following tools and parts:
•
Phillips (+) screwdriver, number 2
•
Tie-wrap
•
Electrostatic discharge (ESD) grounding wrist strap
Related
Documentation
• SRX1500 Services Gateway Installation Overview on page 43
• Installing the SRX1500 Services Gateway in a Rack on page 51
• Preparing the SRX1500 Services Gateway for Rack-Mount Installation on page 49
Copyright © 2017, Juniper Networks, Inc.44
SRX1500 Services Gateway Hardware Guide