Kamstrup MULTICAL 603 - Page 77

MULTICAL®603

KamstrupA/S∙Technicaldescription∙5512‐2029
_
A1_GB
_
06.2017
77

1.and2.Customerno.
Thecustomernumberisa16‐digitfiguredistributedontwo8‐digitmenuitems.Thecompletecustomernumbercan
beadjustedviathetwomenuitemsintheSETUPloop.


3.Date
Themeter’sdatecanbeadjustedintheSETUPloop.Itis
recommendedtoverifythatthedatewasadjustedcorrectly,
especiallyiftimewasadjustedtoo.

4.Time
Themeter’stimecanbeadjustedintheSETUPloop.Itisrecommendedtoverifythatthetimewasadjustedcorrectly,
especiallyifthedatewasadjustedtoo.

5.Yearlytargetdate
1
Themeter’syearlytargetdate1canbeadjustedintheSETUPloop.InMULTICAL®603,itispossibletoactivate
yearlytargetdate 2.Thisfunctionisswitchedoffbydefault,i.e.setat00.00.Ifyearlytargetdate2isactiveina
meterwerecommendthatboth
yearlytargetdatesareadjustedviaMETERTOOLHCWtoensurethattheyare
correctlysetwithrespecttoeachother.Notethattheactivationofyearlytargetdate2influencesthedepthofthe
yearlylogasthemeternowmakestwoyearlyloggings.

6.Monthlytargetdate1
The
meter’syearlytargetdate1canbeadjustedintheSETUPloop.InMULTICAL®603,itispossibletoactivate
monthlytargetdate2.Thisfunctionisswitchedoffbydefault,i.e.setat00.Ifmonthlytargetdate2isactiveina
meterwerecommendthatbothmonthly
targetdatesareadjustedviaMETERTOOLHCWtoensurethattheyare
correctlysetwithrespecttoeachother.Notethattheactivationofmonthlytargetdate2influencesthedepthof
themonthlylogasthemeternowmakestwomonthlyloggings.

 