Kamstrup MULTICAL 603 Technical Description

MULTICAL®603

KamstrupA/S∙Technicaldescription∙5512‐2029
_
A1_GB
_
06.2017
79

12.Averagingperio dofmin/maxPandQ
Theaveragingperiodusedinthecalculationofminimumandmaximumvaluesofpower(P)andflow(Q)canbe
adjusted.Theaveragingperiodisindicatedintheintervalof1…1440minutes.Readmoreabouttheaveragingperiod
ofmin./maxofPand
Qinparagraph7.5.


13.Heat/coolingshift(
hc
)
Thelimitforheat/coolingshift(
hc
)canbeadjustedintheSETUPloop,howeveronlyinmetersorderedasmetertype
6(heat/coolingmeter).Thevaluecanbeselectedintheinterval2…180.00Caswellasat250.00Ciftheuserwants
todisablethefunct ion.Thefunctionisenabledagainbysetting
thelimitatavalueinthevalidareaof2…180C.
Heat/coolingshiftispermanentlydisabledonothermetertypes,andthedisplaythusshows“Off”onallothermeter
typesthan6.Readmoreaboutheat/coolingshiftinparagraph7.4.

Metertype:1,2,3,4,5,
7 Metertype:6

Theframesaround“Off”illuminatesas
long as the primary key remains
activated.
Thefirstdigitflashesandeachdigitcan
nowbesetatavaluewithintherange
0…9.
Ifyouchooseavalueoutsidethevalid
interval(2…180.00C),thevalueis
automaticallyadjustedto250.00C,

whichindicatesthatthefunctionhas
beenswitchedoff.

 

Kamstrup MULTICAL 603 Specifications

General

Flow Sensor	Ultrasonic
Battery Life	Up to 16 years
Power Supply	Battery
Communication Options	M-Bus, Wireless M-Bus, Modbus, BACnet
Display	LCD
Application	Heating and Cooling
Pressure Rating	PN16
Approval	MID
Accuracy	Class 2
Ambient Temperature Range	55°C
Housing Material	Brass