Keithley 2280S-32-6 Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 3: Functions and features
077085503 / March 2019 3-39
When you run a list, you cannot change the following settings from front panel or using SCPI
commands. Sending the following commands causes an error 210, "Not permitted with list enabled."
Source settings that cause an error
Setting
Front-panel operations
SCPI commands
V-Set
 MENU > Source
Settings > V-Set
 HOME > V-Set
[:SOURce[n]]:<function>[:LEVel][:IMMediate][:AMPLitude]
(on page 7-77)
I-Limit
 MENU > Source
Settings > I-Limit
 HOME > I-Limit
[:SOURce[n]]:<function>[:LEVel][:IMMediate][:AMPLitude]
(on page 7-77)
Output delay
 MENU > Source
Settings > Output
Delay
 MENU > Source
Settings > Delay
Rise
 MENU > Source
Settings > Delay Fall
 :OUTPut:DELay:STATe (on page 7-56)
 :OUTPut:DELay:RISing (on page 7-55)
 :OUTPut:DELay:FALLing (on page 7-54)
Slew rise/fall
 MENU > Source
Settings > Slew Rise
 MENU > Source
Settings > Slew Fall
 [:SOURce[n]]:VOLTage:SLEW:RISing (on page 7-79)
 [:SOURce[n]]:VOLTage:SLEW:FALLing (on page 7-
80)
OVP/OCP/
VMax
 MENU > Source
Protect > Over
Voltage Protection
 MENU > Source
Protect > Over
Current Protection
 MENU > Source
Protect > Maximum
Voltage
 HOME > Protect >
OVP
 HOME > Protect >
OCP
 HOME > Protect >
VMax
 [:SOURce[n]]:<function>:PROTection[:LEVel] (on
page 7-76)
 [:SOURce[n]]:VOLTage:LIMit[:AMPLitude] (on page
7-78)
Source delay
 MENU > Source
Delay > Source
Delay
 MENU > Source
Delay > State
 [:SOURce[n]]:DELay (on page 7-74)
 [:SOURce[n]]:DELay:STATe (on page 7-75)

Keithley 2280S-32-6 Specifications

General

Brand	Keithley
Model	2280S-32-6
Category	Power Supply
Language	English