2: General operation Series 2600B System SourceMeter® Instrument
2-94 2600BS-901-01 Rev. C / August 2016
Figure 44: Name Virtual Instrument dialog box
9. In the Virtual Instrument Name box, enter a name that you want to use to refer to the instrument.
10. Click Finish.
11. Click Cancel to close the Wizard.
12. Save the configuration. From the Configuration Utility, select File > Save.
13. In the Keithley Communicator, select File > Open Instrument to open the instrument you just
named.
To Next Page
Loading...
Need help?
General
