System SourceMeter® Instrument Reference Manual Section 8:
2600BS-901-01 Rev. C / August 2016 8-5
Error summary
Error number Error level Error Message
Cannot read current working directory
2211 RECOVERABLE File system error
File system command not supported
2214 RECOVERABLE File access denied
2221 RECOVERABLE File seek error
2223 RECOVERABLE Directory not empty
Invalid specified connection
Invalid timeout seconds (.001 to 30)
2402 RECOVERABLE TSPnet remote error: XXX
TSPnet read failure, aborted
TSPnet read failure, timeout
TSPnet write failure, aborted
2409 RECOVERABLE TSPnet write failure, timeout
TSPnet max connections reached
2412 RECOVERABLE TSPnet invalid termination
TSPnet invalid reading buffer table
TSPnet invalid reading buffer index range
TSPnet feature only supported on TSP connections
TSPnet must specify both port and init
TSPnet disconnected by other side
TSPnet read input buffer overflow
Termination locked while using TSP connection
Average delay must be at least NNN seconds
4900 RECOVERABLE Reading buffer index NN is invalid
ICX parameter count mismatch, (XXX Line #NNNN)
4905 SERIOUS ICX parameter invalid value, (XXX Line #NNNN)
ICX invalid function id, (XXX Line #NNNN)
SMU is unresponsive. Disconnect DUT and cycle power
Saved calibration constants corrupted
Operation conflicts with CALA sense mode
Operation would exceed safe operating area of the instrument
Operation not permitted while OUTPUT is on
Unknown sourcing function
To Next Page
Loading...
Need help?
General
