Keithley 2600B

Series 2600B
System SourceMeter® Instrument Reference Manual Appendix E:
Status model
2600BS-901-01 Rev. C / August 2016 E-21
Commands to program and read the register are summarized below and also in the Status function
summary (on page E-4) table.
Standard event commands
Command Description
*ESR?
or
print(status.standard.event)
Read Standard Event Status Register.
*ESE mask
or
status.standard.enable = mask
Program the Event Status Enable Register:
mask = 0 to 255
See Status register set contents (on page E-1
).
*ESE?
or
print(status.standard.enable)
Read Event Status Enable Register.